Home > Dos Driver > Dos Driver For Sata Dvd Drive

Dos Driver For Sata Dvd Drive


ASPI Manager for USB mass-storage (Universal Driver) device=usbaspi1.sys /V [/E (EHCI USB 2.0) /O (OHCI USB 1.1 Add-on) /U (UHCI USB 1.1 Integrated)] usbaspi2.sys - Novac ASPI Manager for UHCI/OHCI USB Windows 95 Windows 95 does not need a CD-ROM Driver installed as above, as it installs its own driver. Perfect for Internet, Not for heavy usage or gaming however. Do not do the disk check as shown on page 2 of the article. have a peek at these guys

Time ago i made my own ms-dos bootable usb device, then i added to it some other commands like "edit.exe", "format.com", "keyb.com", "undelete.exe", "unformat.exe", "xcopy.exe". Report • #10 DAVEINCAPS January 8, 2010 at 14:39:36 So all your dos files are in c:\dos? CD-ROM speed is increased significantly. "PIO mode" input is still needed for user buffers that are misaligned (not at an even 4-byte address). /UF will be IGNORED for CD-ROM drives which I can't find a DOS DVD/CD driver that will run the DVD drive.

Gcdrom.sys Dos Driver Download

I don't have a link but google should find one. I am not sure you will be able to get DOS to recognize a SATA drive. SET PATH=C:\ As there isn't Config.sys, i can't find any autoexec.bat... As Platypus posted, if you change your BIOS to IDE mode from AHCI, it may see the hard drive, but I would try using Puppy linux.

But until I can get the UFD working I don't see a much point in burning DVDs because I'm expecting to use the same 'floppy' image. Change config.sys to:Device=c:\dos\himem.sysDevice=c:\dos\emm386.exeDos=high,umbDEVICE=DOS\GCDROM.SYS /D:MSCD000 /C0DEVICE=DOS\GCDROM.SYS /D:MSCD001 /C1DEVICE=DOS\GCDROM.SYS /D:MSCD002 /C2And autoexec.bat to:C:\DOS\MSCDEX.EXE /D:MSCD000 /D:MSCD001 /D:MSCD002Also check your files names. The standard commands works correctly, but to use the command i manually copyed in the usb device, when i'm in a folder different from "C:", they don't work. Site Changelog Community Forum Software by IP.Board Sign In Use Twitter Need an account?

If fewer switches than drives are given, the unreferenced drives will NOT be used. Microsoft MSCDEX Extensions Version 2.23 (30Kb Download) The following Pages may provide additional help: The CD-ROM Drivers Guide ~ A Guide to CD-ROM driver resources on the Internet! If a CD-ROM drive is NOT found as primary-master, driver loading will ABORT! /PS Same as /PM but tests the primary-slave unit only. /SM Same as /PM but tests the secondary-master Windows 7 reports the drive as Slimtype DVD A DS8A2S-A ATA.

Solved DOS drivers for SATA DVD drive...? Post back contents of config.sys and autoexec.bat.Ubuntu Cheeta, Ubuntu ! If you are trying to access the SATA drives, simply download the iso file of Puppy linux version 5.2.8 (lupu-528.005.iso)Then use Rufus to create a bootable USB flash drive. However, I tried a "generic" Windows 98 SE boot disk and the CD-ROM driver failed to detect either of my two SATA DVD drives.

Dos Cd Rom Driver

This is also the first time OAKCDROM.SYS didn't work for me. Posted on 2006-10-08 Storage 14 2 solutions 14,415 Views Last Modified: 2011-08-18 I need to boot to my new SATA-II based system using a DOS boot disk. Gcdrom.sys Dos Driver Download Keep in touch with Experts ExchangeTech news and trends delivered to your inbox every month Live Consultants Membership How it Works Gigs Live Careers Plans and Pricing For Business Become an Freedos GCDROM.SYS has to be loaded in CONFIG.SYS / FDCONFIG.SYS.

at that point fdisk should see the drive(s) Warning! More about the author or read our Welcome Guide to learn how to use this site. I think it should just be GCDROM.SYS and not GCDROM23.SYS or GCDROM24.SYS, unless you renamed them.Ubuntu Cheeta, Ubuntu ! I thought rewriting config and autoexec with just basic entries would make things clearer.Gcdrom.sys is the only dos cdrom drive I know of that claims to support SATA.

i REALLY need my DOS to recognize SATA, it's nearlya matter of life or death... How Does a computer get Infected? When finished boot the USB flash drive. check my blog You may also want to have a look at: http://www.freedos.org For a supported open-source DOS clone.

Another important feature is FreeDOS now support lots of hardware and have a very good extended memory support. Fortune Cookie says: Fortune not Found: Abort, Retry, Ignore? I've already tried several different tests with himem.sys and emm386.exe also.

This makes the driver report on a Device-Status request that it reads DATA tracks only! /AX reduces the resident driver by 448 bytes.

See the file H2Cpying for copying conditions. If NO such switches are given, the driver "scans" for CD-ROM drives, from primary-master to secondary-slave. I tried every driver known to man. http://www.cdrom-drivers.com/ Try this link to locate your CD-ROM Manufacturer to see if a MS-DOS or Windows 3.1 Driver is available.

oakcdrom.sys = CD-ROM Driver (Which is named differently by each manufacturer) and can be located in its own directory. Should you be interested in the iso image which u can burn to a cd or usb please contact me at [email protected] Thanks Nuno Back to top Back to DOS/PDA/Other 2 HIMEM.SYS is provided as part of MS-DOS and enables use of the upper memory area. news Back to top BC AdBot (Login to Remove) BleepingComputer.com Register to remove ads #2 JohnC_21 JohnC_21 Members 18,523 posts ONLINE Local time:04:48 PM Posted 09 February 2014 - 05:36

If altoughgh you put the correct parameters and DOS still does not recognize the DVD Driver you maay need to move config parameters to the beginning o end of the CONFIG.SS UltraDMA, multi-drives, and other driver features are NOT affected! /Cx Determines number to detect 1st/2nd/3th SATA native IDE controller. /D: Specifies the desired "device name" which SHSUCDX or MSCDEX will use Such opinions may not be accurate and they are to be used at your own risk. Some CD-ROM Drivers you can try: Oak Technologies Universal IDE CD-ROM Driver ~ 162Kb Download This will get you into almost all of the IDE CD-ROM Drives on the market. ~

http://www.bootdisk.com/ or http://support.mpccorp.com/downloads/boot.html Have a nice selection of CD-ROM Bootdisks that will start most systems. I really, really need that, it's really really important... Following installation, the CD-ROM software driver is normally loaded at system startup time via a series of entries in the machine's C:\CONFIG.SYS & C:\AUTOEXEC.BAT files. Report • #14 DAVEINCAPS January 9, 2010 at 15:28:39 There was another driver, XCDROM.SYS, that some claimed worked.

If you are experiencing a similar issue, please ask a related question Creating a bootable USB drive: another comparison article Article by: Thomas I previously wrote an article addressing the use I'll obtain the exact model numbers and post here. 0 LVL 6 Overall: Level 6 Message Author Comment by:Zoplax ID: 176950892006-10-09 I found a workaround, although unable to boot via dir *.* |more (This gives option "Strike a key when ready" for next page) mouse.com - Microsoft Mouse Driver which provides mouse pointer device support. GCDROM.SYS supports all SATA Native IDE controller, such as Intel ICH6/ICH7/ICH8, Jmicron 363/368, NVidia CK804/MCP55/MCP51 etc.

Read Now LVL 49 Overall: Level 49 Storage 15 Message Active today Expert Comment by:dbrunton ID: 176887832006-10-08 Whose motherboard is it? Report • #3 Mechanix2Go January 6, 2010 at 17:09:03 I'll spare you my opinion of compaq.Any chance it's SCSI? Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been … Storage Windows Server 2012 – Configuring as an iSCSI Target Video Username Forum Password I've forgotten my password Remember me This is not recommended for shared computers Sign in anonymously Don't add me to the active users list Privacy Policy


Report • #13 worky January 9, 2010 at 14:41:13 Yea, I renamed the files so I could identify and work with them at the same time. Edited by JohnC_21, 10 February 2014 - 03:13 PM. Posted by Btan57 on 7 Aug 2007 10:02 I've tried GCDROM in a Dimension 9200 (aka DXP061, G965 chipset) but it doesn't appear to work.